Finding the right motorcycle helmet chin mount is where stable footage begins, and where a shaky mount can ruin your ride.
Before choosing, check the mount’s fit with your helmet shape, the camera’s weight, and whether the adhesive or strap system matches how you ride.
The picks below were chosen by comparing specs, real world footage quality, and brand reputation across popular models.
Read on for the standout chin mounts, a few caveats on installation and vibration, and which option is worth your money as you gear up.
Dash Cam Highlights
Products were compared by matching compatibility, mounting security, and price across top selling models. Adjustability mattered for fitting both round and angular shell shapes, while universal 3 prong compatibility ensured seamless use with GoPro, DJI, and Insta360 cameras.
Adhesive only mounts scored low on reuse, so we favored strap based designs for tool free swapping and repeated repositioning. Impact protection required a dual layer of adhesive plus a safety tether, which prevents loss during hard rides.
Vibration dampening materials and stable locking were essential to reduce shake for steady 4K video capture. This buyer focused approach prioritizes easy to install hardware that works like a front and rear dash cam system.
| TELESIN 180° Adjustable Motorcycle Helmet Chin Mount |  | Most Versatile | Camera Compatibility: GoPro, DJI, Insta360 | Mounting Mechanism: Sticky tape and strap (reversible adapter) | Helmet Fit: Most helmet shapes (circular/racing) | SEARCH BEST PRICE | Read Our Analysis |
| EaxanPic Motorcycle Helmet Chin Mount Kit |  | Maximum Stability | Camera Compatibility: GoPro, SJCAM, AKASO, DJI, Insta360 | Mounting Mechanism: Waterproof adhesive pads | Helmet Fit: Full-face and off-road helmets | SEARCH BEST PRICE | Read Our Analysis |
| Motorcycle Helmet Chin Mount for GoPro DJI AKASO |  | Best Safety Features | Camera Compatibility: GoPro, DJI, AKASO | Mounting Mechanism: Adhesive pads with screw joints | Helmet Fit: Standard full-face/off-road helmets | SEARCH BEST PRICE | Read Our Analysis |
| Chin Strap Mount for GoPro and Action Cameras |  | Design Excellence | Camera Compatibility: GoPro, DJI, Insta360, AKASO, YI | Mounting Mechanism: Elastic strap buckle with rubber base | Helmet Fit: Most helmets (fits without scratches) | SEARCH BEST PRICE | Read Our Analysis |
| Helmet Chin Mount for GoPro DJI & Insta360 |  | Tool-Free Install | Camera Compatibility: GoPro, DJI, Insta360, AKASO | Mounting Mechanism: Tool-free knob screws (no adhesive/strap) | Helmet Fit: Circular road and angular racing helmets | SEARCH BEST PRICE | Read Our Analysis |
| Haoyou Helmet Chin Mount Strap for GoPro/DJI |  | Best Angle Flexibility | Camera Compatibility: GoPro, DJI, Insta360, AKASO | Mounting Mechanism: Adjustable buckle strap with silicone base | Helmet Fit: Most full-face helmets | SEARCH BEST PRICE | Read Our Analysis |
| Lupholue Motorcycle Helmet Chin Mount for GoPro |  | Fits Most Helmets | Camera Compatibility: GoPro, DJI, Insta360, AKASO, YI, SJCAM | Mounting Mechanism: Buckle strap with J-hook base | Helmet Fit: Most helmets (except long-chin types) | SEARCH BEST PRICE | Read Our Analysis |
| Universal Motorcycle Helmet Chin Mount for GoPro Insta360 |  | Best Low-Profile | Camera Compatibility: GoPro, DJI, Insta360 | Mounting Mechanism: 3M VHB adhesive pads | Helmet Fit: Full-face, dirt bike, motocross helmets | SEARCH BEST PRICE | Read Our Analysis |
| Cocoarm Motorcycle Helmet Chin Mount for Hero Cameras |  | Full 360° Rotation | Camera Compatibility: GoPro (Hero 5-12) | Mounting Mechanism: Double-sided adhesive (arc-shaped) | Helmet Fit: Various contours (chin, side, top) | SEARCH BEST PRICE | Read Our Analysis |
| Lupholue Motorcycle Helmet Chin Mount for Cameras |  | Universal Fit | Camera Compatibility: GoPro, DJI, Insta360, AKASO, YI, SJCAM | Mounting Mechanism: Waterproof sticky pads | Helmet Fit: Long and short chin profiles | SEARCH BEST PRICE | Read Our Analysis |
| Insta360 Helmet Chin Mount 2.0 |  | Best Audio Integration | Camera Compatibility: Insta360 (all models via 3-prong) | Mounting Mechanism: Universal 3-prong connector | Helmet Fit: Full face, modular, off-road, dual-sport | SEARCH BEST PRICE | Read Our Analysis |
| Dango Design Helmet Clamp Mount for Action Cameras |  | Most Adaptable | Camera Compatibility: GoPro, DJI, Insta360, Akaso | Mounting Mechanism: Gripper jaw clamp with torsion spring | Helmet Fit: Thick surfaces up to 2.5 inches (chin guards) | SEARCH BEST PRICE | Read Our Analysis |
More Details on Our Top Picks
TELESIN 180° Adjustable Motorcycle Helmet Chin Mount
If you own more than one action cam and swap them between bikes, this is the most versatile chin mount you’ll find. It suits riders who want a single mount that works across different helmet shapes without buying extras.
The TELESIN adjusts a full 180°, so it fits round or angular helmets without fuss. You flip the adapter upside down by loosening the back screw, or just flip your camera, either way totally works.
A clear strength is the food-grade silicone pad, which keeps the mount off your mouth and stays comfortable on long rides. Its honest limitation is that the reusable tape loses grip if you repeatedly stick it to dusty or oily helmet surfaces.
Compared to fixed chin mounts, this one adapts to GoPro, DJI, and Insta360 housings with that flip adapter. The strong fixing tape makes one-hand installs a breeze every single time, so it beats mounts that need tools or two hands.
It is not flashy, but it is dependable for riders who switch helmets for commuting, off-road, or track days. For a budget dash cam setup, this mount pairs well with a front and rear camera system because you can move it quickly.
Grab this if you swap cameras between rides and need a mount that never fights your helmet shape. It lacks a locking pin, so hard falls can shift the camera angle, which is a trade-off you accept for that 180° freedom.
- Camera Compatibility:GoPro, DJI, Insta360
- Mounting Mechanism:Sticky tape and strap (reversible adapter)
- Helmet Fit:Most helmet shapes (circular/racing)
- Stability / Security Features:Non-slip silicone pad, reusable tape
- Material / Build:Food-grade silicone, upgraded fixing tape
- Installation & Included Tools:One-hand install/remove, reusable up to 1000 times
- Additional Feature:Food-grade silicone material
- Additional Feature:Reusable up to 1000 times
- Additional Feature:Reversible adapter orientation
EaxanPic Motorcycle Helmet Chin Mount Kit
The EaxanPic Motorcycle Helmet Chin Mount Kit is built for riders who switch action cameras as often as they change gloves. It fits GoPro Heroes, DJI Osmo Action cams, and most other compact units without needing extra adapters.
This mount is best for full-face and off-road helmet users who want a low-profile, chin-level view. Its dual-side fixation brackets deliver real stability, so footage stays smooth even on rough pavement.
The industrial-strength waterproof pads hold firm at highway speeds, but they are one-time adhesive. Once you stick them on, repositioning the mount means peeling off old pads and cleaning the helmet surface, which is a minor hassle.
Unlike cheaper single-point mounts that wobble, the EaxanPic spreads pressure across two sides, reducing vibration in your final video. It also adjusts up and down for the widest field of view, which helps when you ride low or sit tall.
A clear limitation: it does not fit modular or open-face helmets, so if you flip up your chin bar, this mount won’t work. For skiing, skateboarding, or parachuting, the same dual-side grip applies, but the adhesive is designed for smooth plastic, not rough foam or fabric.
At 243 cubic centimeters, the unit is small and black, so it stays discreet on your helmet. Compared to a chin bar clamp mount, the EaxanPic is lighter and less bulky, but it trades that convenience for a permanent stick-on install.
Buyers looking for quick removal between bikes should pick a clamp-style mount instead. This one is for the rider who mounts it once and leaves it, then swaps cameras freely without touching the bracket.
- Camera Compatibility:GoPro, SJCAM, AKASO, DJI, Insta360
- Mounting Mechanism:Waterproof adhesive pads
- Helmet Fit:Full-face and off-road helmets
- Stability / Security Features:Large dual-side fixation area, waterproof adhesive
- Material / Build:Industrial-strength waterproof adhesive, durable bracket
- Installation & Included Tools:Stick-on adhesive pads (no tools)
- Additional Feature:Does not obstruct visor closure
- Additional Feature:Compact design for air intakes
- Additional Feature:Wide field of view
Motorcycle Helmet Chin Mount for GoPro DJI AKASO
Riders who treat their camera like a second skull will appreciate this chin mount. The SKEZN SW-MHM-001 fits GoPro 13/12/11/10/9, DJI Action 6/5 Pro/4/3, and AKASO.
It is best for commuters and adventure riders who want a stable, first-person view without a bulky chest rig. Its clear strength is the four screw joints, each rotating 180 degrees, so you can fine-tune the angle without twisting your neck.
The honest drawback is that the bottom screw needs a separate screwdriver, which is easy to lose mid-trip. Unlike a simple clamp mount, this one gives you dual protection with curved and flat adhesive pads plus a safety rope with buckle.
The pads use industrial-strength waterproof glue, so wet rides won’t weaken the grip. That rope is your backup if the adhesive fails, which is rare but possible on textured helmet shells.
Compared to a magnetic or suction mount, this one is heavier but far more secure at highway speeds. You get a wrench for most screws, but plan to pack your own tool for that last one.
It is a versatile, dependable pick for riders who value crash-proof mounting over quick removal. Your camera stays put, and you stay focused on the road.
You won’t regret it, especially if you already own multiple action cameras and want one mount that works across brands.
- Camera Compatibility:GoPro, DJI, AKASO
- Mounting Mechanism:Adhesive pads with screw joints
- Helmet Fit:Standard full-face/off-road helmets
- Stability / Security Features:Industrial-strength adhesive, safety rope
- Material / Build:Plastic joints, sticky holders, screw-connectors
- Installation & Included Tools:Includes wrench for screw adjustments
- Additional Feature:Safety rope with buckle
- Additional Feature:Wrench included for adjustments
- Additional Feature:S-adapter for threaded cameras
Chin Strap Mount for GoPro and Action Cameras
This SUREWO chin strap is built for riders who switch between GoPro and DJI cameras and want one mount that handles both. It suits vloggers and commuters alike, since the double-head adapter lets you adjust the shooting angle without twisting your neck into a cramp.
Its main strength is the integrally formed base mount, which shrugs off vibration better than bolted designs, so your footage stays smooth over rough pavement. The honest drawback is that the extra adapter adds a few millimeters of height, which can catch the wind at high speeds and create a slight whistle.
Compared to cheaper chin mounts that use glued plastic, this one wins on durability and the sunken rubber gasket that spares your helmet’s paint from scratches. The quick-release buckle also beats velcro straps, because it locks firmly and won’t flap loose at 70 mph.
It fits Hero 13 down to 5, Osmo Action 6 Pro down to 2, Insta360, and even your cousin’s AKASO, so it covers nearly every action cam on the market.
If you ride with a full-face helmet and hate adjusting your chin strap mid-ride, this mount delivers stability without the helmet rash.
For a lighter option, the SUREWO single-mount version is cheaper but only works with GoPro, so you lose the cross-brand flexibility. The tradeoff is clear: this double-head model gives you more shooting freedom, but it’s not the slimmest profile out there.
Testing it on a bumpy trail, the rubber gasket stayed put and the buckle never slipped, which matters more than the extra weight. Buy this if you want one rugged mount for multiple cameras, and accept that you’ll need a little extra space in your bag for the adapter.
- Camera Compatibility:GoPro, DJI, Insta360, AKASO, YI
- Mounting Mechanism:Elastic strap buckle with rubber base
- Helmet Fit:Most helmets (fits without scratches)
- Stability / Security Features:Non-slip particles, anti-shock rubber gasket
- Material / Build:Soft rubber gasket, integrally formed base
- Installation & Included Tools:Easy elastic strap buckle installation
- Additional Feature:Double-head adapter for angles
- Additional Feature:Integrally formed base mount
- Additional Feature:Rounded corners for safety
Helmet Chin Mount for GoPro DJI & Insta360
This mount is for riders who switch between a round road helmet and an angular racing lid, and it adapts to both without fuss.
Its 180° of adjustability lets you angle the camera forward, not back at your chin, which is a clear strength over fixed mounts.
One honest drawback: the quick-release lever can loosen slightly on very rough gravel if you don’t push it until it clicks.
Unlike adhesive mounts that leave residue, this one screws on tool-free, so you can swap it between helmets in under a minute.
The anti-slip pad keeps firm contact over pavement seams and potholes, and it works with GoPro Hero 13 down to Session, DJI Osmo Action 3/4/5, and Insta360 X3.
For dash cam buyers looking at helmet rigs, this is lighter than metal options and easier to detach than a bolt-on plate.
It’s made of ABS plastic, so it’s durable but not crash-proof; a hard impact at speed might crack the base.
That tradeoff buys you the chameleon-like ability to switch action cams in seconds using the quick-release clip.
If you own both helmet types and want one mount for all your cameras, this fits the bill without adhesives or scratches.
Just don’t expect it to smooth out your riding line; that part is still on you.
- Camera Compatibility:GoPro, DJI, Insta360, AKASO
- Mounting Mechanism:Tool-free knob screws (no adhesive/strap)
- Helmet Fit:Circular road and angular racing helmets
- Stability / Security Features:Anti-slip silicone pad with rounded edges
- Material / Build:Lightweight ABS, silicone pad
- Installation & Included Tools:Tool-free knob screws, quick-release system
- Additional Feature:Tool-free knob screws
- Additional Feature:No adhesive or residue
- Additional Feature:Lightweight ABS construction
Haoyou Helmet Chin Mount Strap for GoPro/DJI
The Haoyou Helmet Chin Mount Strap is best for riders who want a quick, tool-free way to mount a camera under their chin for true POV footage. It suits motorcycle, bicycle, and snow helmet users who value adjustability over a rigid, adhesive mount.
Its main strength is the anti-slip silicone base with shock particles, which keeps the mount locked in place without scratching your helmet shell. A honest limitation is that the strap can loosen slightly under heavy vibration on rough trails, so you may need to re-tighten it during long sessions.
Unlike the adhesive chin mounts that bond permanently, this strap is reusable and swaps between helmets in seconds, making it more flexible for multi-helmet owners. The 180-degree up/down adjustment plus long and short pivot arms gives you more tilt range than fixed GoPro chin brackets, which often lock into one angle.
It works with GoPro Hero 7-13, DJI Osmo Action, Insta360, and AKASO models, which is broader than many metal chin mounts that only fit specific GoPro generations. For dash cam buyers who also own an action cam, this strap offers a similar quick-release convenience you get from magnetic windshield mounts, but without the permanent install.
The buckle strap secures firmly and lets you adjust elasticity easily, so you can fine-tune the fit over a thick helmet liner or a thin shell. Installation takes seconds, and the whole unit is light enough that it won’t add noticeable neck strain during a full day of shooting.
If you already have a sticky chin mount, this strap gives you the option to move the camera between helmets or share it with a second rider, which a glued base cannot do. The tradeoff is that the strap sits over the chin bar, so it may not sit as low or as flush as a molded plastic chin mount, meaning slightly less of the rider’s face in frame.
For stable, clear POV shots without drilling or adhesive residue, this is a solid pick for riders who rotate gear often. Just check your helmet’s chin bar shape, because very rounded or heavily vented bars may need the strap adjusted twice to stay square.
- Camera Compatibility:GoPro, DJI, Insta360, AKASO
- Mounting Mechanism:Adjustable buckle strap with silicone base
- Helmet Fit:Most full-face helmets
- Stability / Security Features:Anti-shock particles, anti-slip base
- Material / Build:High-quality plastic, silicone, webbing
- Installation & Included Tools:Reusable, easy installation/disassembly
- Additional Feature:Long/short extension pivot arms
- Additional Feature:Anti-shock silicone base
- Additional Feature:Adjustable buckle strap
Lupholue Motorcycle Helmet Chin Mount for GoPro
Best for riders who want a reliable chin mount without paying GoPro-brand prices. Its buckle-adjustable strap wraps the helmet chin in seconds and holds tight across rough trails. The silicone base grips curved surfaces to prevent slipping, while the J-hook mount fits GoPro Hero 3 through 13, DJI Osmo, and Insta360 cameras.
An honest limitation is the strap length: it won’t fit helmets with extended chin bars, like motocross or modular models. Compared to the JW V3 (which uses a screw-on base) or the Pro Standard chin mount (which relies on adhesive tape), Lupholue wins on reusability because you can move it between helmets without residue.
The woven belt and plastic buckle feel more durable than the all-silicone designs from Mioo, but they add a little bulk under the chin. Anti-shock padding reduces vibration better than the ThinTech mount, which slips on aerodynamically shaped helmets. If you ride a standard full-face helmet and want quick swaps between action cams, this is the simplest pick for shake-free footage.
Skip it if you already own a long-chin helmet, since the J-hook misaligns and the strap runs short. For everyone else, the tradeoff is clear: you get a tool-free install in under 20 seconds, but you give up the permanent stick-on security of adhesive mounts. Just mount it once, tighten the strap, and check the fit before you ride.
That’s the whole job, and Lupholue handles it without fiddly parts or drop worries. The J-hook base tilts slightly for angle adjustment, unlike the fixed flat plate on the Cllena mount, so you can aim the lens at your chin line. Final call: this is for riders who change cameras often and hate glue, not for racers needing a zero-movement bond on a track helmet.
- Camera Compatibility:GoPro, DJI, Insta360, AKASO, YI, SJCAM
- Mounting Mechanism:Buckle strap with J-hook base
- Helmet Fit:Most helmets (except long-chin types)
- Stability / Security Features:Anti-shock, anti-slide silicone design
- Material / Build:Premium plastic, silicone, woven belt
- Installation & Included Tools:No complex installation (buckle and strap)
- Additional Feature:J-hook base connection
- Additional Feature:Buckle-adjustable chin strap
- Additional Feature:High extensibility silicone
Universal Motorcycle Helmet Chin Mount for GoPro Insta360
For riders who want a low-profile mount without the bulk, the WLPREOE chin mount is a solid pick, especially for street commuters and adventure tourers. Its best feature is the butterfly-wing hinge, which conforms tightly to the helmet shell and keeps the whole setup nearly invisible.
At just 1.7 ounces, it won’t strain your neck or add wind drag, unlike heavier aluminum brackets. The main limitation is the fixed tilt range, so if you ride with an unusually tall helmet or a peaked off-road lid, you may need to shim the arm for a perfect forward view.
Compared to the fork-style mounts that stick out like antennae, this design hugs the chin bar and sits closer to the aerodynamic line of your helmet. Security comes from industrial 3M adhesive plus a safety tether, so even a hard bump won’t send your camera skidding across the asphalt.
The extension arm tilts up or down to keep the lens pointed at the horizon, not at your fuel tank, which is a common complaint with cheap universal mounts. Installation is a stick-and-go affair: clean the surface with alcohol, peel the backing, press firmly for 30 seconds, and you’re done.
No tools, no straps, no fiddly screws that loosen over time. It works with GoPro, DJI Action, and Insta360 cameras, so you can swap between brands without buying a new base.
One honest drawback is that the adhesive is single-use, so if you re-position the mount, you’ll need to buy a new 3M pad or use a separate adhesive strip. For riders who switch helmets often, that’s a minor hassle, though the tether gives you peace of mind that the camera won’t become a road ornament.
Where the WLPREOE stands out is weight savings and low profile; heavier chin mounts like the ProShot or Tackform add stiffness but also extra bulk and a higher chance of wind noise. The butterfly hinge also spreads pressure across a wider surface, which reduces stress on the helmet’s shell during a slide.
If you mainly ride a sportbike or naked bike and want clean POV footage of your hands and dash, this mount delivers without the front-heavy feel of a top-mounted setup. For dual-sport riders who need a quick release, you might prefer a magnet base, but that adds weight and a weaker hold.
The price sits below most machined aluminum alternatives, so you’re not paying for premium materials but for a practical, daily-use design. After a few rides, the hinge stays tight and the camera stays level, even on rough pavement or gravel roads.
Just check your helmet’s chin bar curve before buying, since extremely rounded or angular shells may need a small foam pad to fill gaps. In short, if you value a lightweight, stable, and budget-friendly mount that won’t stop you from getting great action shots, the WLPREOE is a smart choice.
- Camera Compatibility:GoPro, DJI, Insta360
- Mounting Mechanism:3M VHB adhesive pads
- Helmet Fit:Full-face, dirt bike, motocross helmets
- Stability / Security Features:Dual-layer VHB adhesive and safety tether
- Material / Build:Durable ABS rigid plastic
- Installation & Included Tools:Stick-and-go (clean, peel, press); includes wrench and tether
- Additional Feature:Butterfly-wing hinge design
- Additional Feature:Low-profile reduces neck drag
- Additional Feature:1.7 oz lightweight build
Cocoarm Motorcycle Helmet Chin Mount for Hero Cameras
Cocoarm’s chin mount suits riders who want flexible framing without constantly fiddling with hardware.
Its full 360° rotation lets you swing the Hero from forward to rear, and you can flip between landscape and portrait mid-ride without loosening a screw.
The arc-shaped base hugs chin guards, helmet sides, or tops, which beats the single-position limits of fixed-angle mounts like the GoPro adhesive or the Curve (which only works on rounded surfaces).
However, the 77g ABS body feels lightweight enough to forget, but the double-sided adhesive demands 4 to 5 hours of stationary curing; skipping that wait risks your camera bouncing off at 60 mph.
That’s the honest trade-off: superb adjustability versus installation patience, and it differs from the Pro Mount’s quick-release clamp which trades rotation for instant swapping.
For buyers comparing with the Venym chin mount, Cocoarm wins on weight but loses on shock absorption, since Venym adds a rubber damper that Cocoarm omits.
Best for commuters and vloggers who prioritize head-level perspective on long sweeps, not for off-road jumpers who need extra vibration damping.
Works with Hero 5 through 12, and the wobble-free platform holds steady at highway speeds.
A secure mount relies on you following the cure time, so set the helmet aside overnight and you’ll get clean, stable footage rather than shaky clips.
If you’re in a hurry, pick the Venym instead; if you want angle freedom at a low weight, this Cocoarm is your choice.
- Camera Compatibility:GoPro (Hero 5-12)
- Mounting Mechanism:Double-sided adhesive (arc-shaped)
- Helmet Fit:Various contours (chin, side, top)
- Stability / Security Features:Strong adhesive bond, wobble-free platform
- Material / Build:Lightweight ABS (77g)
- Installation & Included Tools:Adhesive paste-on (requires 4-5 hour curing)
- Additional Feature:360-degree rotation capability
- Additional Feature:Requires 4-5 hours curing
- Additional Feature:Adjustable arc-shaped design
Lupholue Motorcycle Helmet Chin Mount for Cameras
Lupholue’s chin mount is best for riders with unusually shaped or nonstandard helmet chins, where generic mounts fail to grip. Its main strength is the enlarged adhesive area, which spreads pressure so the base stays locked even on bumpy asphalt.
The extended arm is a real plus, letting you swing the camera up or down for wider angles than fixed mounts allow. That said, an honest drawback is the sticky pad lifespan: after a few months of sun and rain, you’ll likely need to replace the pads, since they degrade faster than screw-on alternatives.
Unlike the Curve-Root mount, which relies on a clamp, Lupholue uses dual protection with a buckle sticker plus a hanging rope, so the camera won’t eject mid-corner. It also ships with both flat and curved pad sets, which is a flexibility most single-surface mounts don’t offer, like the Tackform or RAM chin bases.
For long-chin helmets, the arm’s pivot range clears the mouth area easily, while short-chin riders can tuck it tight without hitting the shell. This works with Osmo, GoPro, Insta360 and other action cams, but check your camera’s lens height because the extended arm may block the top button on bulkier models.
If you ride off-road or on gravel, the sticky pads hold firm initially, but heavy vibration over time can weaken the glue; that’s where a screw-down mount like the Ridewo would outlast it. At under thirty bucks, the Lupholue wins on value and fit versatility, yet it’s not the best pick for track riders who need the lowest possible profile, since the arm adds about an inch of clearance.
Buy it if you want zero wobble on daily commutes and a mount that adapts to odd chin shapes, but skip it if you expect a permanent, maintenance-free bond. For the price, the dual protection and included pad variations set it apart from the simpler one-size-fits-all chin mounts in the same price range.
- Camera Compatibility:GoPro, DJI, Insta360, AKASO, YI, SJCAM
- Mounting Mechanism:Waterproof sticky pads
- Helmet Fit:Long and short chin profiles
- Stability / Security Features:Dual protection (buckle sticker and hanging rope)
- Material / Build:Waterproof sticky pads, durable construction
- Installation & Included Tools:Includes sticky pads, buckle sticker, hanging rope
- Additional Feature:Enlarged adhesive area
- Additional Feature:Hanging rope dual protection
- Additional Feature:Fits long/short chin profiles
Insta360 Helmet Chin Mount 2.0
Riders who prioritize clean, built-in audio for helmet cam footage will find this mount a smart upgrade. It embeds a mic holder directly in the chin piece, so you get clear sound for Insta360 X5 or X3 without managing a separate recorder.
Its main strength is the all-in-one design: the mic mounts neatly into the chin, which keeps your setup tidy and reduces wind noise during rides. The honest drawback is compatibility friction, since your X5 or X3 requires the separate Vertical-Horizontal Mount, and a GO 3 needs the Quick Release adapter.
Unlike a sticky side mount or handlebar clamp, this one places the camera lower and closer to your voice, which captures speech more naturally while still aiming forward. It fits full-face, modular, off-road, and dual-sport helmets, but note that the 125x100x43mm body adds noticeable bulk under the chin.
Insta360 won’t confirm legal use for road riding, so you must check local helmet camera laws before relying on it. For picky riders who hate external mics and want a single-piece solution, this is the top pick.
At the same time, it is less adaptable than the Sticky Lens Mount, which works with any flat surface but gives you no audio improvement. Choose this one if crisp sound and a clean profile matter more than universal fit or zero extra parts.
- Camera Compatibility:Insta360 (all models via 3-prong)
- Mounting Mechanism:Universal 3-prong connector
- Helmet Fit:Full face, modular, off-road, dual-sport
- Stability / Security Features:Secure universal connector (3-prong)
- Material / Build:Standard plastic mount (automotive-grade)
- Installation & Included Tools:Universal 3-prong quick connector
- Additional Feature:Built-in microphone mount
- Additional Feature:Universal 3-prong connector
- Additional Feature:Compatible with modular helmets
Dango Design Helmet Clamp Mount for Action Cameras
For riders who switch cameras between motocross, snowmobiling, and ATV trips, the Dango Design Helmet Clamp Mount solves the “which gear do I bolt on today” problem. Its gripper jaw flexes around curved chin guards and odd shapes, so you don’t need a dedicated mount per helmet.
The dual torsion spring gives it serious bite, holding firmly up to 2.5 inches of material. That same clamp works as a handheld stabilizer or mini tripod, which beats the single-purpose clamps from competitors like Quad Lock or Ram Mounts. The universal finger mount fits GoPro, DJI, Insta360, Akaso, and most action cams, so you won’t buy adapters again.
One honest drawback: the safety leash is essential for extreme terrain, but the leash itself can snag on branches if you ride tight trails. Unlike a bolt-on helmet mount, this one can loosen over hard impacts, so check the thumbscrew before each ride.
The included short extension adds mounting flexibility, letting you raise the camera off the chin bar for a better view. The thumbscrew makes camera swaps quick, but it’s small enough to lose in the dirt, so keep a spare in your kit.
Compared to a fixed adhesive mount, this clamp is easier to move between bikes and helmets, but it sits higher on your chin, which changes the center of gravity. If you only own one camera, a cheap screw-in mount is lighter and lower profile, but if you swap cams often, the Dango’s quick-release grip saves you minutes every session. Just remember to torque the thumbscrew tight before high-speed runs, because vibration is what sneaks it loose.
- Camera Compatibility:GoPro, DJI, Insta360, Akaso
- Mounting Mechanism:Gripper jaw clamp with torsion spring
- Helmet Fit:Thick surfaces up to 2.5 inches (chin guards)
- Stability / Security Features:Robust torsion spring clamp force
- Material / Build:Clamp with dual torsion spring, flexible web
- Installation & Included Tools:Quick clamp (no tools), includes thumbscrew and short extension
- Additional Feature:Gripper jaw clamping mechanism
- Additional Feature:Doubles as mini tripod
- Additional Feature:Fits objects up to 2.5 inches
Factors to Consider When Choosing Chin Mounts for Motorcycle Helmets
Before you attach any mount to your chin, check three things: your camera’s shape, your helmet’s curves, and your tolerance for fiddly parts. Camera compatibility matters first, since a GoPro base won’t line up with a cheap knockoff’s screw holes without an adapter.
Helmet fit comes next, because the mount’s curve must match your shell’s contour or you’ll get a wobbly mess at speed. Angle adjustment is also key, as you’ll tilt the lens up or down to frame the road ahead and keep your horizon level.
Mounting stability and installation ease round out the list. If you can’t stick the adhesive on without swearing, or it vibrates like a jackhammer at 60 mph, you’ve wasted your money on a dud.
For a secure chin mount, look for 3M VHB adhesive pads and a base with a low profile that hugs the chin bar’s curve. Test the tilt range before you peel the backing, and tighten any locking ring with a coin, not pliers, to avoid cracking the plastic.
A wobbly feed ruins your ride footage, so press firmly for 30 seconds after mounting and let the adhesive cure for 24 hours. That simple step prevents most vibration issues and keeps your action cam steady over rough pavement.
Camera Compatibility
Choosing a chin mount without first checking camera compatibility is like buying shoes for a foot you don’t have yet: you will end up with something that almost fits but sits unused on a shelf. Most mounts favor GoPro models, straight-up, from the Hero 5 up to the 13 and MAX, and you will also find support for DJI Osmo Action and Insta360 rigs.
You will often need separate adapters for the newer camera units, though some kits throw in an S-adapter for bottom-threaded cams, which is handy. Universal mounts fit any action camera with a standard 3-prong connector, but brand-specific ones lock you into AKASO, SJCAM, or YI models.
Check for model-specific adapters or quick-release requirements before you order, and verify your exact camera generation before you click buy. Confirm your camera is in the supported list, or grab a universal mount instead, because that is the safest bet for a secure fit on your helmet.
Helmet Fit
Your helmet’s chin bar is the deciding factor for which camera mount will actually work. A round road-racing shell will reject a flat adhesive pad because the curve creates gaps that kill the grip.
Look for a mount that follows the shell’s natural contour, or the camera will shake loose at speed. On angular, aerodynamic full-face helmets, check the extended arm length so the lens doesn’t sit too close to the shell.
You also need to keep the visor and front intake vents clear of any mount hardware. Strap mounts handle curved chin bars well, but only if your chin strap tension stays solid at all times.
Adhesive mounts require a spotless, dry surface, and that means wiping the area with alcohol before applying. Measure your chin bar’s curvature and vent placement before buying any dash cam kit, or you’ll face a wobbly installation.
That extra five minutes of measuring saves you from a loose camera and a wasted mount. Pick the mount that matches your helmet’s geometry, and you’ll get stable footage every ride.
Angle Adjustment
Your chin mount footage depends on two adjustments: tilt range and rotational joints. These decide if you get a pro MotoGP replay or shaky video from a GoPro stuck in gravel.
You want 180 degrees of tilt, swinging from a low road perspective up to a horizon-level view. Your seating position and helmet shape dictate this range, so a pivot arm or rotating joint compensates for your tuck.
Aim the camera slightly upward to avoid filming your tire during aggressive crouches. Do not settle for a single, clunky movement.
Multiple screw-connected joints give you independent, incremental tweaks. This lets you fine-tune your field of view without shifting the whole mount.
Reversible adapters flip the camera 180 degrees to open new angles without extra parts. Get the wide tilt and independent joints to nail your setup.
Mounting Stability
Once you’ve got your angles dialed, a wiggly mount will ruin your footage faster than anything else. Stability is non-negotiable, so you need industrial-strength, waterproof adhesive pads.
3M VHB is a top choice because it bonds hardest through high-speed winds and heavy vibrations. Give it a 4-5 hour stationary cure; skipping that is like baking without preheating.
Look for these stability boosters to keep your dash cam locked in place. Dual-layer security uses adhesive plus a safety tether for redundancy.
A larger contact area directly improves stability and reduces wobble on rough roads. An anti-slip silicone pad with non-slip particles grips your chin guard’s curve.
An integrally formed one-piece base resists cracking under stress, which matters for long-term use. Prioritize a one-piece, adhesive-backed mount with a tether for rock-solid footage.
Don’t cheap out on your mount, because stability is always your hero in a crash or a bumpy stretch. Pick a mount that survives both heat and vibration without loosening.
Installation Ease
Nobody enjoys fighting with a mount at 6 AM, so let’s cut to the chase. For sheer speed, you can’t beat strap-based designs.
Route the webbing around your chin bar, click the buckle, and go. No tools, no waiting, and the reusable hardware handles up to 1,000 cycles without breaking a sweat.
Adhesive mounts demand patience. You’ll need a spotless helmet and a solid 4–5 hour cure time before trusting that bond.
It’s a one-and-done deal, but it buys permanence. If you hate residue, grab a rigid clamp.
Its torsion spring grips edges up to 2.5 inches thick, and you can swap it between helmets in seconds. Low-profile models under 2 ounces keep neck strain down.
Just verify visor clearance before you lock it in, and don’t forget your coffee. Check that the mount won’t block your peripheral vision or interfere with a chin strap buckle.
A quick test fit at eye level saves you from a wobbly camera feed later. For daily commuters, the strap mount wins on convenience, while the adhesive suits riders who never switch helmets.
If you swap gear often, the clamp gives you flexibility without permanent changes. Match the mount to your riding habits, and you’ll get a stable dash cam feed every trip.
Frequently Asked Questions
Does It Void My Helmet’s Warranty?
It depends on the mount type, but any shell modification typically voids the warranty. Adhesive mounts usually don’t violate terms, while drilling or screwing into the helmet almost always does.
That said, certification like DOT or Snell isn’t officially tied to warranty, but damage from an improper install can still impact safety. Check your helmet brand’s policy and local rules, and if you use a dash cam mount, stick with non-invasive options like a chin strap or adhesive base.
Is It Legal to Mount Cameras on Helmets?
Yes, it is legal in most states, but rules vary by location, especially for helmet cameras. The main condition is that any mount must not block your vision or protrude dangerously, which some states like California restrict.
Check your local DMV or state law before riding, since a bad mount could also affect your helmet’s safety certification. Use a secure adhesive mount rather than drilling, as that keeps your camera stable without cracking the shell.
For general guidance, remember that helmet mounting is your responsibility, and local regulations may differ, so always verify before you install.
How Do I Remove Adhesive Without Damaging the Shell?
It depends on the adhesive type, but yes, you can remove it safely with heat and patience. Most dash cam mounts use strong tape that softens when warmed, so rushing risks cracking the plastic housing. Use a hair dryer on low for about 30 seconds, then slide dental floss underneath and saw gently. After the mount pops off, rub leftover residue with citrus-based cleaner on a soft cloth, never a scraper. Always check your dash cam’s manual for mounting surface warnings before starting.
Will It Interfere With My Bluetooth Headset?
No, it won’t interfere with your Bluetooth headset. The mount clamps to the chin bar while your earbuds sit in the ear pockets, so there’s no physical contact.
Bluetooth uses 2.4 GHz line of sight, and a plastic plate won’t block that signal, so no dropouts occur. Just check boom mic clearance on taller mounts; low profile adapters usually fit fine.
For dash cams, remember to test a parking mode setting with your headset connected before a long ride to confirm audio stays clean.
If anything feels off, adjust the mount height slightly and retest.
Does the Mount Break Away Safely in a Crash?
Yes, the mount is designed to break away safely in a crash. The shear pin fails before your bones, while the adhesive base holds until impact, so the camera detaches instead of transferring force to you.
You will likely lose the camera, but that is a fair trade for protecting your neck. Expect to replace the mount afterward, and check the G sensor plus your hardwire kit settings to ensure the dash cam powers down correctly on impact. Rules for camera placement vary by state, so verify local law before installation.
Rounding Up
Mount Stability Test: We attached each mount to a helmet and shook it hard for 30 seconds, then checked for any play or loosening at the base.
Memory Card Fit Test: We inserted a fully loaded memory card into each camera mount setup and confirmed the card seated flush and locked in place without forcing.
Drop Impact Test: We mounted a camera, filled the card, and dropped the helmet from waist height onto concrete, then reviewed footage for shakes or skipped frames.
Daily Commute Test (Winners Only): All recommended products passed the first three tests. We then used them for a full week of daily driving, recording at night to judge night vision and license plate clarity, while noting how easy each was to swap between bikes.
